COMPLEMENTS YOUR BUILD
-
Aluminum Forged Upper Control Arms
2-4 inch Lifted | Chevy Silverado GMC Sierra 1500 2007-2018
$329.99
-
1.5 inch Hubcentric Wheel Spacers
6X5.5 | Silverado Sierra 1500 / Chevrolet / GMC / Cadillac
$165.99
-
3" Front and 2" Rear Leveling Lift Kit
2007-2024 | Chevy Silverado 1500 | GMC Sierra 1500 | 2WD 4WD
$129.99
KSP Aluminum Forged Control Arm is our most advanced product to date.
Specifically engineered for GM vehicles with a 2–4 inch lift , it effectively
addresses ball joint
angle issues
while significantly enhancing driving performance.
While our steel models are already outstanding performers, the Aluminum Series takes it even
further — offering
reduced weight, increased strength, and natural rust resistance
, allowing for a raw, uncoated finish that delivers a
clean, rugged look.
Material
Design
Ball joints and bushings are parts subject to wear. We have extended their service life,
especially under
off-road conditions, through improved design and provide a one-year warranty.
Alternatively, you can always obtain replacement components from here.
| Years | Make | Model |
|---|---|---|
Does NOT fit stock height models.
Does NOT fit 2007 "Classic" models. (old body style)
Does NOT fit models with 3.5in lifted knuckle kit.
Does NOT fit stock wheel with 275 or 285 width tires, and stock 20"or 22" rims
You need wheel spacers to avoid the problem of wheels rubbing the control arms
Q: Is the price for one or two control arms?
A: The listed price is for a complete set - one pair of control arms.
Q: Will it fit a 6", 7", or 8" lift?
A: No. These control arms are designed only for 2-4 inch lifted trucks.
Q: What aftermarket ball joints will it fit?
A: KSP arms are engineered with our own ball joints and are not compatible with most aftermarket options. We recommend using KSP ball joints for best fit and performance.
Q: What grease should I use?
A: We recommend you to use NLGI #2 lithium grease for the ball joints, and a silicone-based lubricant for the polyurethane bushings.
- M12x1.75 Nylon Lock Nut - 2 pcs.
- PU Bushing - 8 pcs.
- PU Bushing Tube - 4 pcs.
- M6x1 Zerk - 5 pcs. (1 extra)
- Ball Joint Cover - 2 pcs.
- Tapered Sleeve - 2 pcs.
- M6x1-12 bolt - 2 pcs.
- M4x0.7-6 Bolt - 4 pcs.
- HEX 2.5 Allen Wrenches - 1 pc.
- KSP LOGO - 2 pcs.
